KAron Features & Benefits

Liner 

Characteristics

Typical Applications

KAron B          

  • Dynamic operating pressures to 50,000 psi (345 MPa)
  • Velocities to 3 fpm (1 M/min)
  • Temperature range -100°F to +400°F (-73°C to +205°C)
  • Thickness range 0.005-0.06" (0.127-1.5mm)
  • SAE AS81820 & SAE AS81934 Qualified
  • Main & nose landing gear, doors, uplocks, etc.
  • Fuselage attachments
  • Jet engine attachments and supports
  • Thrust reverser mechanisms
  • Other high load applications

KAron BX

  • Dynamic operating pressures to 50,000 psi (345 MPa)
  • Velocities to 10 fpm (3 M/min)
  • Temperature range -100°F to +325°F (-73°C to +162°C)
  • Thickness range 0.005-0.06" (0.127-1.5mm)
  • SAE AS81820 Type A Qualified
  • Flight controls
  • Landing gear joints and shock strut bearings
  • Fuel controls/pumps
  • Various mechanisms

KAron V

  • Dynamic operating pressures to 40,000 psi (276 MPa)
  • Velocities to 10 fpm (3 M/min)
  • Temperature range -100°F to +300°F (-73°C to +150°C)
  • Thickness range 0.005-0.06" (0.127-1.5mm)
  • SAE AS8943 Qualified
  • Flap attachment mechanisms
  • Spoiler, rudder, elevator, horizontal stabilizer hinges & actuators
  • Landing gear shock struts, uplocks
  • Fairings, aircraft doors
  • Other high load, low fricition applications

KAron VS

  • Dynamic operating pressures to 15,000 psi (103 MPa)
  • Velocities to 10 fpm (3 M/min)
  • Temperature range -100°F to +300°F (-73°C to +150°C)
  • Thickness range 0.005-0.06" (0.127-1.5mm)
  • EN4540, EN4538, EN4539 Qualified
  • Primary & secondary flight control hinges & actuators
  • Slat and flap track rollers
  • Flap carriages
  • Other friction sensitive applications

KAron F

  • PTFE enriched outer surface
  • Dynamic operating pressures to 20,000 psi (138 MPa)
  • Velocities to 10 fpm (3 M/min)
  • Temperature range -100°F to +250°F (-73°C to +121°C)
  • Spherical bearings
  • Track rollers
  • Landing gear sleeves
  • Other high load, low friction applications